Search on site
         RU
         EN
Request a call
8 (342) 2-111-500

ADM100 GLONASS/GPS


Buy in one click

     

    ADM100 terminal is designed for mounting onto vehicle as an optional device to register its location, speed and driving direction by signals from GLONASS/GSP system. 

    In addition, it registers a number of other parameters, such as:  the state of analog and digital inputs, and signals from sensors (sensor readings). 

    All events and conditions registered by the terminal are stored in a non-volatile memory. The accumulated data is transmitted through GSM 850/900/1800/1900 network of cell communications operator with the use of GPRS packet data transmission technology to a dedicated server from which it can be obtained via the Internet for further analysis and processing at the dispatcher console.

    The terminal can be used on all types of vehicles. 

     

    Benefits of ADM100 GLONASS / GPS Terminal

    • High-sensitivity receiver ensures the quick location in the adverse conditions.
    • Compact case with built-in GSM and GLONASS/GPS antennas.
    • Easy installation.
    • The possibility of choosing navigation system (GLONASS, GPS, GLONASS+GPS)
    • Remote updating of terminal firmware version via GPRS.
    • Wide range of supply voltage. Guaranteed operation at 8.5 to 40V, short-time operation at voltage of up to 50V, and built-in protection against power surges over 50V.
    • Open and flexible protocol which is supported by most telematics servers.
    • Support for domain name as the server address.
    • Support for EGTS protocol.
    • Password protection of terminal and SIM card against unauthorized operation.
    • PCT certificate, and TR CU 020/2011 declaration.
    • Compact size and low weight.
    • Technical support by the manufacturer.
    • Two-year warranty period.

     

    Technical Features

    • Sensivity of GLONASS/GPS receiver: -165dBm;
    • Number of channels of GLONASS / GPS receiver: 132;
    • Communications standard: GSM 850/900/1800/1900, GPRS Multi-slot Class 12;
    • 1 SIM card;
    • 2 analog/digital inputs;
    • 2 impulse/digital inputs;
    • Open collector output;
    • RS-485 interface;
    • Supply voltage: +8.5..+40V;
    • Number of route records to store: 30000;
    • Control via USB, SMS, GPRS;
    • Dimensions: 90х60х32mm

     

    Modifications in the firmware for ADM100 / ADM300 / ADM101 / ADM111 / ADM301 / ADM311 user terminal are as follows:

    0x4D – 18 February 2016

    1. Improved displaying of the white list of operators.
    2. Corrections made: some instructions sent without parameters over gprs connection could disturb the setting and send back an error message (starting with 0x4B version). To update terminal with 0x4B or 0x4C version, use instruction message sent by SMS or USB.

    0x4C – 1 February 2016

    1. Improved to disconnect GSM and GLONASS / GPS modules when vehicle is standing or parked.

    0x4B – 29 January 2016

    1. Modified to make an outgoing call by pressing PTT button.
    2. Modified to support CAN-LOG via RS485
    3. Modified to set a phone number used to control the terminal by SMS via gprs or usb connection
    4. Improved to control Escort fuel level unit via RS485

    0x4A – 11 January 2016

    1. Correction made to the terminal which gets restarted under certain conditions 

    0x49 – 30 December 2015

    1. Fixed to preclude transmission of wrong IMEI under certain conditions

    0x48 – 30 December 2015

    1. Added support for ШТРИХ-М tachograph.
    2. Modified to transmit data transmission from tachograph odometer.
    3. Modified to transmit driver card number from tachograph.
    4. Modified to make Operation of ADM100 becomes more stable.

    0x47 – 4 December 2015

    1. Improved time synchronization via GPRS
    2. Modified to transmit MNEA messages via RS485

    0x46 – 13 November 2015

    1. Changed timing algorithm.
    2. Modified transmission of cellular network signal strength

    0x45 – 30 September 2015

    1. Improved uploading of ddd-files from tachograph 

    0x2A – 22 September 2015

    1. Modified to generate the white list of cellular operators

    0x44 – 17 July 2015

    1. Added accelerometer sleep mode (ADM300) 
    2. Stabilized operation of black box

    0x42 – 10 June 2015

    1. Updated support for ADM20 readers

    0x3F – 12 May 2015

    1. Fixed GSM freezing or hanging when sending GSM instruction messages (starting with 0x38 firmware version)

    0x3E – 30 April 2015

    1. Added support for ADM20 reader.  
    2. Modified to answer an incoming call by pressing button on ADM1 hands-free. 

    0x3S – 30 April 2015

    1. Added transmission of driver card number from ATOL Drive 5 tachograph (ADM101). 

    0x3B – 16 April 2015

    1. Improved performance of black box.

    0x3A – 8 April 2015

    1. Added support for ADM1 hands-free button

    0x39 – 1 April 2015

    1. Added support  for uploading of ddd-files from ATOL Drive 5 tachograph 

    0x38 – 23 March 2015

    1. Corrected error in SETHOST0 instruction execution 

    0x37 – 13 February 2015

    1. Changed functionality algorithm for NAVIA module

    0x36 – 11 February 2015

    1. Modified to correct incorrect download of data (starting with 0x35 firmware version).

    0x35 – 9 December 2015

    1. Added GSM support for M95FA module
    2. Added support for ADM20

    0x33 – 1 January 2015

    1. Modified to correct incorrect data setting under certain conditions
    2. Corrected resetting of operator list (OPSWHITELIST0 0,0)

    0x30 – 1 October 2014

    1. Added status of PTT button in the status field

    0x2F – 17 September 2014

    1. Added SPEEDALARM instruction

    0x2D – 27 August 2014

    1. Default pulse inputs in the pulse counter mode

    0x2B – 20 August 2014

    1. Added COM8 instruction. Improved performance of Megafon operating system
    2. Improved displaying of supply voltage (over 25.5V) in EGTS protocol
    3. Modified to debug NMEA messages

    0x2A – 19 August 2014

    1. Added white list of cellular operators (OPSWHITELIST instruction)

    0x29 – 4 August 2014

    1. Fixed to stabilize the performance in poor GSM signal conditions. 
    2. Added status of Open (Tamper) button in the status field.

    0x28 – 28 July 2014

    1. Corrected EGTS protocol: egts_sr_ext_pos_data , egts_liquid_level_sensor_data packages

    0x25 – 14 July 2014

    1. Stabilized GSM operation under certain conditions.

    0x24 – 9 June 2014

    1. Corrected TAGREADER 
    2. Modified to work with the flow sensor with two phase shifted outputs (IMPULSE 5.5)

    0x23 – 19 May 2014

    1. Added EGTSEVENTSRC instruction.
    2. Corrected ACCELALARM instruction.
    3. Corrected tagReader

    0x22 – 8 May 2014

    1. Added RINGVOLUME instruction.
    2. Corrected SIM PIN

    0x21 – 26 April 2014:

    1. Corrected SIM PIN

    0x20 – 22 April 2014

    1. Corrected OUTPUT instruction

    0x1F – 16 April 2014

    1. Changed GSM performance
    2. Corrected tagReader
    3. Adjusted work with USB 

    0x1E – 8 April 2014

    1. Added acceleration control (ACCELALARM instruction) 
    2. Adjusted work with SMS (SMS stored in SIM card cannot be deleted)
    3. Corrected tagReader

    0x1D – 26 March 2014

    1. Added TAGREADER instruction
    2. Added TAGREADERCOUNT instruction 

    0x1A – 11 March 2014

    1. Added GPSPOWERLIMIT instruction 
    2. Added GSMPOWERLIMIT instruction 
    3. Reduced GSM power consumption

    0x19 – 7 February 2014

    1. Modified to make m2m.beeline.ru the default access point for SIM0.

    0x18 – 4 February 2014

    1. Fixed to reset configuration upon updating from firmware version earlier than 0x0F.
    2. Corrected UPDATE instruction  

    0x17 – 30 January 2014

    1. Corrected SETGPRS0 instruction
    2. Fixed problem arising in the absence of satellites when data could be sent to the server with the wrong time.
    3. Fixed to adjust incorrect speed according to EGTS protocol

    0x16 – 20 December 2013

    1. Added RS485_MSG debugging messages    
    2. Modified to determine the access point automatically when SIM1 is a SIM-chip.

    0x15 – 3 December 2013

    1. Added RS232_MSG, STORAGE_MSG, and GPS_CTRL debugging messages
    2. Added SETGPRS1 instruction for SIM-chip 

    0x14 – 12 December 2013

    1. Added GPS_CTRL, CAM_CTRL, MEM_C, ERROR, EGTS_MSG, and GPRS_BUF debugging messages 
    2. Corrected EGTS protocol.
    3. Corrected SN instruction

    0x11 – 16 October 2013

    1. Added debugging mode
    2. Fixed to correct the error during work with SMS messages, when messages in Russian could result in the device rebooting 

    0x10 – 8 October 2013

    1. Added support for two pulse inputs 
    2. Correct USSD instruction
    3. Fixed to adjust the work with MATRIX III RD-ALL card readers
    4. Corrected UPDATE instruction 
    5. Fixed to send parameter specified by REPLY instruction to the server in the first package.

    0x0F – 29 August 2013

    1. Added support for SIM-chip
    2. A new modem indication mode (monotonically for 3 seconds) is added to be used when operator refuses to register the device in GPRS network which can be caused by lack of funds on SIM card account.
    3. Added SETGPRS1 instruction
    4. Added SIMPRIORITY instruction 
    5. Corrected UPDATE instruction 
    6. Adjusted work with modem
    7. Disabled reception of broadcast messages 

    Request a call back


    Your request is sent

    We will contact you during business hours from 9:00 to 18:00

    make Up

    A name *
    Your phone *

    Become an affiliate

    A name *
    Your phone *
    Your E-mail *
    Your company *

    Choose solution

    A name *
    Your phone *
    Your E-mail *